WQMS are industry experts in hot work safety in the mining industry. Our speciality is maintenance welding. We support our clients via SME services, training and competency assessment.
WQMS have worked with the NSW Resource Regulator in drafting the TRG Hot Work (Welding and Cutting) and provided input to QLD Guidance Note 36 - Managing Welding Fume in Coal Mines
WQMS have presented at numerous mining industry safety conferences, such as the NSW Mechanical Engineering Safety Seminar, QLD Mining Industry Health & Safety Conference, and quarterly meetings hosted by state based regulators.
Expert advisory and consultancy services for
Hot Works Safety Management System - Audit/Review, Risk reviews, Bow ties, input and/or drafting of procedures, standards and permits
PHMP's and Critical Controls
Welding Fume Management
Compliance with latest legislative requirements (the latest updates to AS1674 for example)
Demonstrable and defensible risk and safety management for insurance purposes
The Hot Works Management Safety training has been specifically developed for the mining industry, address the large rage of hazards relating to maintenance welding, and integrate with mine site SHMS requirements,
These courses enable you to meet WHS competency requirements for managers and supervisors, and comply with state based requirements such as
RS22 and RS11 (QLD)
TRG Hot Work compliance (NSW)
WHS Supervisor competency requirements
There are 2 courses available (see below for links)
Risk Owners (which provides a high level overview of the various hot work hazards and the critical controls that need to be provided by the hot works safety management system)
Supervisors (Technical training to ensure that supervisors are able to identify hot work related hazards and ensure effective controls are in place and apply the hot work safety management system).
If you are a risk owner at a mine site, contact us for free access to this training. Limited time offer!
This training course is also available for in person groups. Contact us for more details.
All Mining acts and regulations require that workers have "competence for the assigned task".
A trade certificate does NOT provide safety VoC. A welder qualification test does NOT provide safety VoC
To address this issue, WQMS have developed a formal safety Verification of Competency (VoC) process that is compliant with WHS requirements for the 6 types of welding and allied processes typically used for mine site maintenance
FCAW
GMAW
MMAW
Carbon Arc Gouging
Ox-Fuel Cutting
Flame Heating
The Maintenance Welding Safety VoC provides a standardised industry certification (like a trade certificate or working at heights certification) that can be used by any site or company.
The Maintenance Welding Safety VoC has 3 steps, with an additional 4th step for specific authorisations
Step 1 - Trade Certificate (or apprenticeship) minimum requirement
Step 2 - Knowledge Assessment. If the candidate cannot demonstrate the required knowledge, they will need to complete the relevant welding process specific training before reattempting
Step 3 - Practical Assessment. The candidate must be able to demonstrate that they can do a pre-start inspection, set-up the equipment, safely operate the equipment, and correctly shut down and stow the equipment.
Step 4 - this is an optional additional competency assessment for specific higher risk tasks such as Thermic Lancing.
WQMS are seeking industry partners who are interested in making this a scalable, self service process, with locally based approved assessors to support industry.