Weld-Hit is a specialised air tool with custom-designed impact bits for Inter-run Peening to reduce residual stresses and High Frequency Mechanical Impact (HFMI) of weld toes to dramatically improve fatigue life
HFMI Toe Peening
3x to 10x increase in Fatigue Life
40% Increase in Fatigue Strength
More effective weld repairs with greater MTBF and less issues with re-cracking
Inter-Run Peening for Residual Stress Control
Two butt welds welded using identical parameters. The bottom plate had inter-run peening. Note the lack of distortion
Weld Cap and Surface Peening
The weld cap can be peened to impart residual compressive stresses to improve fatigue performance.
Edge Peening
Produce a smoothly rounded corner with residual compressive stresses to massively increase the fatigue life and reduce cracking from edges of plate.
Technical Specifications
Weight including tool: 1.25 kg
Length including tool: ~255 mm
Beats Per Minute: 6500
Vibration: 2.5 m/s2 (EN ISO 28927-10)
Noise level: 98 dB (A)
Air: 6 Bar, 330 l/min (Dry / lubricated air supply)
Most cost effective HFMI kit on the market.
Pricing from $3000+GST for the tool with separate impact bit packs from $500+GST
Comes with comprehensive training and competency assessment
3 Impact Bit pack options available to suit your needs
Fabrication
Bridges, Cranes, High Fatigue service equipment
Maintenance and Repairs
Essential to achieve effective crack repairs
Deluxe
All the impact bits you need for any job